PoE Switch 4 Port 10/100/1000T 802.3bt 90W + 1-Port Gigabit RJ45 + 2-Port 100/1000X SFP

PoE Switch Product Description:

E-link's LNK-IMC205GHP-SFP Series is a Mini Industrial High Power 90W 802.3bt PoE Switch that offers users a versatile connection option. Featuring 4 *10/100/1000T Ethernet ports, which support IEEE802.3at/af/bt for a maximum of 90W/port, as well as 1*10/100/1000T Gigabit Ethernet port and 2*100/1000 dual rate SFP slots for fiber connection.

The versatile LNK-IMC205GHP-SFP adopts the IEEE 802.bt PoE++ standard and PoH technology, granting it the capability to source up to 95 watts of power by using all the four pairs of standard Cat5e/6 Ethernet cabling to deliver power and full-speed data to each remote PoE compliant powered device (PD). By tripling the power capabilities of conventional 802.3at PoE+, it is an ideal solution to satisfy the growing demand for higher power consuming network PDs, such as: PoE PTZ speed dome cameras, Thin clients, AIO (all-in-one) touch PCs, point of sale (POS) and information kiosks, Remote digital signage displays and PoE lightings.

Being IP40 rated and DIN-rail mountable, the LNK-IMC205GHP-SFP adopts high EFT and ESD protection for industrial networking applications, making it suitable for scenarios such as power/utility, water wastewater, oil/gas/mining, factory automation, security surveillance, ITS and any other outdoor or harsh environment.

Gigabit PoE Switch Features:

This device provides five 10/100/1000Base-T Gigabit Ethernet RJ45 copper ports. Each port can operate independently without affecting other ports and boasts a high transmission speed. Equipped with two SFP slots, this device supports 1000Base-X and 100Base-FX transceiver in dual modes, providing a powerful connection. This device complies with the IEEE 802.3bt PoE Standard, ensuring that it can provide a stable power supply for all of the connected PoE devices. This device can support up to four ports of IEEE 802.3bt, at and af devices and can provide them with the power they need to operate properly. The device provides a power budget up to 360 watts for any of the PoE devices connected to it, avoiding any unnecessary power loss and making it even more efficient. Each of the PoE ports can support an output power of up to 95 watts, allowing the device to support high-power PoE devices without any issue. This device supports installation through a DIN-Rail system, making it flexible in terms of where it can be placed and the types of installations it can be used in. The compact fanless design allows the device to avoid overheating, allowing it to run at full capacity while still maintaining an adequate level of cooling. The device also comes with an IP40 rugged high strength metal case, making it durable enough to withstand any tough environment. The device is powered by 48~57V DC redundant power with reverse polarity protection, ensuring that the power supply is always protected and any issues can be quickly resolved.

90W PoE Switch Technical Parameters:

Standards:	IEEE 802.3 Ethernet
	IEEE 802.3u Fast Ethernet
	IEEE 802.3ab Gigabit Ethernet
	IEEE 802.3x Full-Duplex Flow Control
	IEEE 802.3az Energy Efficient Ethernet (EEE)
	IEEE 802.3bt 4-pair Power over Ethernet
	IEEE 802.3at Power over Ethernet Plus PSE
	IEEE 802.3af Power over Ethernet Plus
Forward & Filtering Rate:	14,880pps (10Mbps)
	148,800pps (100Mbps)
	1,488,000pps (1000Mbps)
Packet Buffer:	2Mbits
Packet Length:	10Kbytes
MAC Address Table:	4K
Switch Fabric:	14Gbps/non-blocking
Exchange Property	Backplane bandwidth: 14Gbps; Packet forwarding rate: 14.88Mpps
Connector:	4 ports with 802.3at PoE+ injector function (Ports 1 to 4)
Network Cables	Twisted-pair: 　10BASE-T: 2-pair UTP Cat. 3,4,5, up to 100m 　100BASE-TX: 2-pair UTP Cat. 5, up to 100m 　1000BASE-T: 4-pair STP Cat 5 up to 100m   Fiber-optic Cable 　1000BASE-SX: 　　50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m/2km. 　1000BASE-LX: 　　9/125μm single-mode cable, providing long distance of 2/10/20/40/80/120km (depending on SFP module) 　100BASE-FX: 　　50/125μm or 62.5/125μm multi-mode fiber cable for up to 2km (depending on SFP module) 　　9/125μm single-mode cable for 20/40/60/120km (vary on SFP module)
Interface
Connector:	5 x RJ45 (4-Port 802.3at PoE Out)
Optical Port:	2 x SFP 1000Base-X or 100Base-FX (auto detection)
PoE (Power over Ethernet)
Standard:	IEEE802.3af/at/bt
Port:	RJ45
Power Pin Assignment:	Pair 1 End-span: 1/2(-), 3/6(+) Pair 2 Mid-span: 4/5(+), 7/8(-) 802.3bt/PoH: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE Budget:	Up to 360-watt PoE budget
Environmental
Operating Temperature:	-40°C to 80°C (-40°F to 176°F)
Storage Temperature:	-40°C to 85°C (-40°F to 185°F)
Relative Humidity:	5% to 95% non-condensing
MTBF	> 200,000 hrs
Electrical and Mechanical
Input Power:	48~57VDC (Terminal Block)
Power Consumption:	382W Max. (PoE in use)
	<5W (PoE not in use)
Power Input Overload:	Automatic Resettable
Reverse Polarity:	Present
Dimensions (LxWxH):	95 x 88 x 46mm
Weight:	300g
Casing:	Aluminum Case
Mounting Options:	DIN-Rail

 

 

Support and Services:

We offer technical support and services for our Industrial PoE Switch product. Our support team is available 24/7 to help you with any questions or issues you may have.

We provide technical support over the phone, email, and live chat. Our team of engineers are available to answer your questions about installation, troubleshooting, and configuration of the Industrial PoE Switch.

We offer software and firmware updates for the Industrial PoE Switch. Our team of engineers can help you update the software or firmware as needed.

We provide a one-year warranty on the Industrial PoE Switch. We also offer maintenance services to help you keep the switch running optimally.

 

Packing and Shipping:

 

Din Rail PoE Switch Ordering Information:

Model	Description
LNK-IMC205GHP-SFP	Industrial 4-Port 10/100/1000T 802.3bt 90W PoE + 1-Port 10/100/1000T + 2-Port 100/1000X SFP Gigabit Ethernet Switch
SFP Options	► SFP option. Please select your SFP on our SFP Options Page (Industrial SFP).
	► SFP module is to be purchased separately.
Mounting Options	► Default DIN-Rail Bracket installed;
Power Options	► 480W/10A 48VDC DIN-Rail Power Supply. Open Wire for Terminal Block.
	► Power Supply is to be purchased separately